ELMECO BLarge Série Manuel D'utilisation Et De Maintenance page 24

- Wet the gasket before inserting it in its place. Please be careful and insert the gasket with its junction in one of the
rear corner;
- Reassemble the machine;
- Reconnect the machine to the electric network.
On removing the piston from the container, carefully follow the steps in the images below to dismantle the shaft seal.
The tool in the images is provided with the Quickream machine.
After disassembly, wash the seal and the piston housing as described in the cleaning paragraph and reassemble the
parts.
Disassembling the piston seal for cleaning
1
4
7
2
5
- 22 -
3
6