11. Troubleshooting guide
Danger!
Before troubleshooting, switch off the equipment and remove the battery.
The table below contains a list of fault symptoms and explains what you can do to remedy the problem
if your equipment fails to work properly. If the problem still persists after working through the list, please
contact your nearest service workshop.
Problem
The equipment
does not work
Equipment operates
intermittently
If the equipment will not work in spite of the troubleshooting measures and the voltage supply being OK,
please contact customer service (see section 8.3).
Anl_GE_HH_18_45_Li_T_USA_Kit_SPK7.indb 16
Anl_GE_HH_18_45_Li_T_USA_Kit_SPK7.indb 16
EN
Possible cause
- Battery empty
- Battery is not correctly inserted
- Loose connection (external)
- Loose connection (internal)
- ON/OFF switch defective
- 16 -
Remedy
- Charge battery
- Remove battery and insert again
- Consult a specialist workshop.
- Consult a specialist workshop.
- Consult a specialist workshop.
24.03.2020 10:58:48
24.03.2020 10:58:48