Intended Use; Technical Data - EINHELL GE-HH 18/45 Li T Traduction Du Mode D'emploi D'origine

2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
store where you made your purchase at the latest
within 5 work days after purchasing the article and
upon presentation of a valid bill of purchase.
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, keep the packaging until the end
of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, plastic sheets and small parts. There is
a risk of choking and suff ocating!
•
Complete handle
•
Complete tube with motor unit
•
Shoulder strap with safety release
•
Hedge trimmer mounting kit
•
Guard for hedge cutter blade
•
Original operating instruction with safety
information
Separately available accessories
18V 1.5Ah P-X-C lithium-ion battery
18V 2.0Ah P-X-C lithium-ion battery
18V 2.6Ah P-X-C Plus lithium-ion battery
18V 3.0Ah P-X-C lithium-ion battery
18V 4.0Ah P-X-C lithium-ion battery
18V 5.2Ah P-X-C Plus lithium-ion battery
18V P-X-C Dual Port Fast Charger
18V P-X-C Fast Charger
Explore battery + charger options at
einhellUSA.com
Anl_GE_HH_18_45_Li_T_USA_Kit_SPK7.indb 12 Anl_GE_HH_18_45_Li_T_USA_Kit_SPK7.indb 12
EN

3. Intended use

Hedge trimmer
The hedge trimmer mounting kit is allowed to be
used only on the supplied motor head. Caution!
This hedge trimmer is suitable for cutting hedges,
bushes and shrubs. Caution! Do not use this
equipment to cut grass.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be voided
if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.

4. Technical data

Motor power supply: ............................18 V
Cutting speed: .....................1700 cut strokes/min
Blade length: ...............................17.7 in. (45 cm)
Cutting length: .............................15.7 in. (40 cm)
Cutting diameter max.: ...............0.51 in. (13 mm)
Telescoping pole: 6.9 ft to 10 ft (2.10 m to 3.04 m)
Multi-angle head: ....-60°,-40°,-20°,0°,20°,40°,60°
Multi-angle main handle: ............. -40°,-20°,0°,20°
Weight (Tool only): ........................ 9.5 lbs (4.3 kg)
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect
condition.
•
Maintain and clean the equipment regularly.
•
Adapt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
•
Wear gloves.
- 12 -
24.03.2020 10:58:47 24.03.2020 10:58:47