Intended Use; Technical Data - EINHELL GE-BC 43 AS Instructions D'origine

instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Important!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Original operating instructions
•
Safety instructions

3. Intended use

The power scythe (using the cutting blade) is
designed for cutting young trees, strong weeds
and undergrowth. The power trimmer (using the
line spool with cutting line) is designed for cutting
lawns, grassed areas and small weeds. The ope-
rating instructions as supplied by the manufactu-
rer must be obeyed to ensure that the equipment
is used properly. Any use which is not expressly
permitted in the manual may result in damage
to the equipment and place the user in serious
danger. Be sure to observe the restrictions in the
safety instructions.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or indust-
rial businesses or for equivalent purposes.
Important. Due to the high risk of bodily injury
to the user, the petrol power scythe must not be
used to carry out the following work: to clean dirt
and debris off walkways, or to chop up tree or
hedge clippings. Similarly, the petrol power scythe
must not be used to level out high areas such as
molehills. For safety reasons, the petrol power
scythe must not be used as a drive unit for other
work tools or toolkits of any kind.
Anl_GE_BC_43_AS_SPK9.indb 23 Anl_GE_BC_43_AS_SPK9.indb 23
GB
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.

4. Technical data

Engine type ................................2-stroke engine,
.................................. air-cooled, chrome cylinder
Max. engine output .................... 1.25 kW / 1.7 hp
Displacement ........................................ 42.7 cm
Idle engine speed .................... 3,100 ± 400 min
Max. engine speed
Scythe: ...............................................9,300 min
Trimmer: .............................................8,500 min
Max. cutting speed
Scythe: ...............................................7,000 min
Trimmer: .............................................6,400 min
Weight (with empty tank) ............................9.2 kg
Cutting circle diameter of line ................. Ø 46 cm
Cutting circle diameter of blade ........... Ø 25.5 cm
Cutting line length ...................................... 6.0 m
Cutting line diameter ............................... 2.4 mm
Ignition .................................................Electronic
Drive ........................................Centrifugal clutch
Tank capacity .............................................980 ml
Spark plug ................................................ RCJ7Y
Fuel consumption (specifi c) ............... 450 g/kWh
Sound and vibration
L sound pressure level ........................ 97 dB(A)
pA
K uncertainty .............................................. 3 dB
pA
L sound power level .......................... 113 dB(A)
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
In operation
Vibration emission value a
K uncertainty = 1.5 m/s
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect condi-
tion.
•
Maintain and clean the equipment regularly.
•
Adopt your way of working to the equipment.
•
Do not overload the equipment.
- 23 -
3
-1
-1
-1
-1
-1
= 4 m/s
2
h
2
29.05.2019 08:16:40 29.05.2019 08:16:40