Safety Information; Layout And Items Supplied; Intended Use - EINHELL GE-CT 18 Li Kit Instructions D'origine

Masquer les pouces Voir aussi pour GE-CT 18 Li Kit:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
Danger!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete original operating in-
structions and safety information with due care.
Keep these operating instructions in a safe place
so that the information is available at all times. If
you give the equipment to any other person, hand
over these original operating instructions and the
safety information as well. We cannot accept any
liability for damage or accidents which arise due
to failure to follow these instructions and the safe-
ty information.

1. Safety information

For the relevant safety information please refer to
the booklet included in delivery.
Danger!
Read all the safety information and instruc-
tions. Any errors made in following the safety
information and instructions set out below may re-
sult in an electric shock, re and/or serious injury.
Keep all the safety information and instruc-
tions in a safe place for future use.
Explanation of the warning signs on the
equipment (see Fig. 23)
1: Warning!
2: Wear goggles and ear mu s!
3: Protect from moisture!
4: Read the instruction manual before starting!
5: Keep other people out of the danger area!
6: The equipment continues to rotate!

2. Layout and items supplied

2.1 Layout (Fig. 1/2)
1
Safety lock-o
2
On/O switch
3
Catch for turning the handle
4
Additional handle
5
Height adjustment (union nut)
6
Edge guide
7
Blade head
8
Safety hood
9
Blade
10 Charging unit
11 Battery
12 Compartment for spare blades
13 Lock for rotatable motor head
GB
14 Fastening screw
2.2 Items supplied
Please check that the article is complete as
speci ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
Open the packaging and take out the equip-
ment with care.
Remove the packaging material and any
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
Inspect the equipment and accessories for
transport damage.
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or su ocating!
Trimmer
Guard hood
Battery (Not supplied with Art. No. 34.111.72)
Charging unit (Not supplied with Art. No.
34.111.72)
Additional handle with spare blades
Original operating instructions
Safety information

3. Intended use

The equipment is designed for cutting lawns and
small areas of grass in private and hobby gar-
dens.
Equipment designed for use in private and hobby
gardens is regarded as unsuitable for use in pub-
lic facilities, parks and sports centers, along road-
ways, or in agriculture and forestry. The operating
instructions as supplied by the manufacturer must
be kept and referred to in order to ensure that the
equipment is properly used and maintained.
Important. This equipment must not be used
for composting purposes (shredding) as this
could result in injury or damage to property.
- 21 -

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ge-ct 18 li34.111.9734.111.72

Table des Matières