Troubleshooting Guide - EINHELL GE-HC 18 Li T Traduction Du Mode D'emploi D'origine

11. Troubleshooting guide

Danger!
Before troubleshooting, switch off the equipment and remove the battery.
The table below contains a list of fault symptoms and explains what you can do to remedy the problem
if your equipment fails to work properly. If the problem still persists after working through the list, please
contact your nearest service workshop.
Problem
The equipment
does not work
Equipment operates
intermittently
Anl_GE_HC_18_Li_T_Part2_USA_SPK7.indb 16 Anl_GE_HC_18_Li_T_Part2_USA_SPK7.indb 16
EN
Possible cause
- Battery empty
- Battery is not correctly inserted
- Loose connection (external)
- Loose connection (internal)
- ON/OFF switch defective
- 16 -
Remedy
- Charge battery
- Remove battery and insert again
- Consult a specialist workshop.
- Consult a specialist workshop.
- Consult a specialist workshop.
19.03.2019 14:54:12 19.03.2019 14:54:12