Maintenance And Troubleshooting - Tecno-gaz CLIP Manuel De L'utilisateur

MAINTENANCE AND TROUBLESHOOTING
The device requires no maintenance, except regular cleaning.
For cleaning, please refer to the health and hygiene regulations.
• Switch off the machine and pull the plug out of the electrical socket.
• If the machine has just been used, waiting for the cooling: shutdown fan after
using
• Use a sponge dampened with soapy water and dry with a clean dry cloth.
• Do not use harsh detergents, which could irremediably alter the appearance of
the plastic parts of the machine.
• Do not spray directly onto the machine, as this would risk damaging the
electrical part inside it.
DO NOT DO MAINTENANCE OR INSIDE REPAIR TO THE DEVICE.
DISMANTLE THE DEVICE MEANS BREAKING IT.
Defect Cause
Pushing START
Lack Power
button the
1
device does
Fuse/s burned
not work
Diagnostics and troubleshooting
If the device does not work properly or not at all, contact an authorized service
centre.
It is not possible to work directly on the device.
The only work allowed is the following:
• Cleaning and disinfection (maintenance and troubleshooting)
• Checking the efficiency of the LEDs: Reduction in the light power, as a
consequence of LEDs that are not working or power supply problems,
reduces the whitening process.
Intervention
Control plug fit correctly in sockets
Replace the fuse/s FA1 as tag
17
ENGLISH