Transporting - Stihl HTA 66 Notice D'emploi

Masquer les pouces Voir aussi pour HTA 66:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

English
4.8.2
Pull-In
The pole pruner is pulled away from the operator when the
bottom of the bar is used for cutting.
WARNING
■ If the rotating chain makes contact with a hard object and
is suddenly pinched, the pole pruner is abruptly jerked
away from the operator. The user can lose control of the
pole pruner and be seriously injured.
► Always hold your pole pruner firmly with both hands.
► Use the working techniques described in this instruction
manual.
► Keep the guide bar straight in the cut.
► Apply the stop properly.
► Always cut with the chain running at full speed.
54
4.8.3
Pushback
The pole pruner is pushed back toward the operator when
the top of the bar is used for cutting.
WARNING
■ If the rotating chain makes contact with a hard object and
is suddenly pinched, the pole pruner is abruptly pushed
back toward the operator. The user can lose control of the
pole pruner and be seriously injured.
► Always hold your pole pruner firmly with both hands.
► Use the working techniques described in this instruction
manual.
► Keep the guide bar straight in the cut.
► Always cut with the chain running at full speed.
4.9

Transporting

4.9.1
Pole Pruner
WARNING
■ The pole pruner may turn over or shift during transport.
Persons may be injured or property damaged.
4 Safety Precautions
0458-191-9621-A

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hta 86

Table des Matières