NOTE
If you wish, you can fit the filling acces-
►
sory 8 onto the lid 9 (Fig . 2):
–
Press the filling accessory 8 into the
cut-out on the lid 9 .
Now you can add ingredients even during
operation .
Fig . 2: Fitting the filling accessory
7) Push the lid 9 onto the mixing bowl 6 .
8) Turn the rotary switch 3 to the required
level (see the section "Speed settings") .
After you have finished using your
appliance
1) Turn the appliance off using the rotary
switch 3 (Position "OFF") .
2) Remove the lid 9 from the mixing bowl
6 .
3) Push the release button 2
the swivel arm 1 to the highest position .
4) Remove the attachment 0 q w from the
drive shaft 7 by pushing the attachment
0 q w against the drive shaft 7 and
turning clockwise (direction
same time . Then you can remove the at-
tachment 0 q w .
5) Remove the mixing bowl 6 by turning it
anticlockwise and then pulling it upwards .
6) Clean the appliance (see section "Clean-
ing and care") .
SKM 650 A1
Cleaning and care
►
ATTENTION! PROPERTY DAMAGE!
►
NOTE
►
Cleaning the housing
Wipe the housing with a damp cloth . For
■
stubborn soiling use a mild detergent on
the cloth . Wipe off any detergent residue
using a cloth moistened with clean water .
Then dry the appliance carefully .
Cleaning the accessories
Clean the mixing bowl 6, the lid 9, the
■
and move
filling accessory 8 and the kneading
hook 0, the whisk q and the beater w
in warm water with a little washing-up
liquid . Any residues can be removed with a
washing-up brush . Rinse all parts with warm
) at the
clean water and make sure that all parts
are dry before re-using them .
DANGER! RISK OF ELECTRIC
SHOCK!
Before cleaning the appliance, discon-
nect the power plug from the mains
power socket! There is a risk of electric
shock!
Never immerse the appliance in water
or any other liquid!
Do not use abrasive or aggressive clean-
ing materials . These may damage the
surfaces .
We recommend cleaning the appliance
directly after use . This makes food resi-
dues easier to remove .
GB │ IE
│
7
■