DeWalt DCN692 Traduction De La Notice D'instructions Originale page 48

ENGLIsh
Nail thickness.
2.8–3.3 mm
Loading capacity.
55
Suitable nail collation angle.
30 - 34˚
Date Code Position
The date code which also includes the year of manufacture, is
printed into the housing.
Example:
2017 XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Trigger
1
Trigger safety lock-off
2
Contact trip
3
Depth adjustment wheel
4
Low battery and jam/stall indicator light
5
Stall release lever
6
Magazine
7
Pusher latch
8
Mode selector switch
9
Rotating rafter/belt hook
10
On-board hex wrench
11
Battery pack
12
No-mar tip
13
Speed selector switch
14
Intended Use
The DCN692 and DCN695 cordless framing nailers have been
designed for driving nails into wooden workpieces.
The DCN692 cordless framing nailer is designed for sequential/
bump modes. This nailer is designed for sequential/bump
modes MUsT NOT be used on scaffoldings, stairs, ladders or
ladder-like constructions, e.g., roof laths. For exemptions check
your local national workplace regulations.
The DCN695 cordless framing nailer is designed for sequential
use only, whether in standard sequential mode, or RapidCycle
sequential mode for faster nailing. Nailers designed for
sequential only mode MaY BE used on scaffoldings, stairs,
ladders or ladder-like constructions, e.g., roof laths.
DO NOT use under wet conditions or in the presence of
flammable liquids or gases.
These cordless nailers are professional power tools.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
46
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.

WARNING: Use only D
e
Inserting and Removing the Battery Pack
from the Tool (Fig. B)
NOTE: Make sure your battery pack
To Install the Battery Pack into the Tool
Handle
1. Align the battery pack 12
handle (Fig. B).
2. Slide it into the handle until the battery pack is firmly seated
in the tool and ensure that you hear the lock snap into place.
To Remove the Battery Pack from the Tool
1. Press the release button 15
out of the tool handle.
2. Insert battery pack into the charger as described in the
charger section of this manual.
Fuel Gauge Battery Packs (Fig. B)
Some D WALT battery packs include a fuel gauge which
e
consists of three green LED lights that indicate the level of
charge remaining in the battery pack.
To actuate the fuel gauge, press and hold the fuel gauge
button 16 . A combination of the three green LED lights will
illuminate designating the level of charge left. When the level
of charge in the battery is below the usable limit, the fuel gauge
will not illuminate and the battery will need to be recharged.
NOTE: The fuel gauge is only an indication of the charge left on
the battery pack. It does not indicate tool functionality and is
subject to variation based on product components, temperature
and end-user application.
Rotating Rafter/Belt Hook (Fig. F)
The rafter/belt hook 10 and can be easily positioned to the left
or right of the tool to accommodate left- or right-handed users.
If use of the hook is not desired at all, it can be rotated to the
front or back of the handle base.
Loading the Tool (Fig. D)

WARNING: Always lock tool off and disconnect battery
pack before loading and unloading fasteners.
WALT battery packs and chargers.
12 is fully charged.
with the rails inside the tool's
and firmly pull the battery pack