Renkforce 751514 Notice D'emploi page 140

Example 1:
You have programmed 3 telephone numbers.
The call sequence is set to 2.
Message repetitions is set to 2
The call confirmation code is set to 0 (factory setting).
In an alarm situation the sequence without confirmation is as follows:
Telephone number
1st number
2nd number
3nd number
1st number
2nd number
3nd number
140
Text message
1st repetition - signal tone
2nd repetition - signal tone
1st repetition - signal tone
2nd repetition - signal tone
1st repetition - signal tone
2nd repetition - signal tone
1st repetition - signal tone
2nd repetition - signal tone
1st repetition - signal tone
2nd repetition - signal tone
1st repetition - signal tone
2nd repetition - signal tone
Telephone dialler hangs up
Telephone dialler hangs up
Telephone dialler hangs up
Telephone dialler hangs up
Telephone dialler hangs up
Telephone dialler hangs up