The System Components; Control Panel; Movement Sensor - Renkforce 751514 Notice D'emploi

6. The system components

a) Alarm control centre
• Programming and operation via separate control panel (max. pa-
rallel attached control panels = 4)
• Internally integrated alarm dialler
• Sabotage contact (alarm when housing opened)
• 8 differential zones (individually programmable)
• Connection for 12 V/DC lead rechargeable battery (backup power
supply during electricity disruptions)
• 5 voltage outlets
• 3 Alarm outputs
• Microphone input (room monitoring)
• Remote controllable by telephone
b) Control panel
• The control panel is used for all programming and operation of the
alarm system.
• The status LEDs relay the current system status.
c) Movement sensor
• Detection angle 90°
• Wall mounting
• Range of up to 12 metres
• Operating voltage 8 – 16 V/DC
• Sabotage contact (NC)
• Dimensions (L x W x H): 60 x 105 x 42 mm
• Relay contact NC (contact load 12 V/DC 50 mA)
82