Renkforce 751514 Notice D'emploi page 141

Example 2:
You have programmed 3 telephone numbers.
The call sequence is set to 2.
Message repetitions is set to 2
The call confirmation code is set to 0 (factory setting).
In an alarm situation the sequence with confirmation is as follows:
Telephone number
1st number
2nd number
3nd number
2nd number
3nd number
Example 3:
You have programmed 3 telephone numbers.
The call sequence is set to 2.
Message repetitions is set to 2
The call confirmation code is set to 1 (factory setting).
In an alarm situation the sequence with confirmation is as follows:
Telephone number
1st number
2nd number
Text message
1st repetition - signal tone
2nd repetition - signal tone
1st repetition - signal tone
2nd repetition - signal tone
1st repetition - signal tone
2nd repetition - signal tone
1st repetition - signal tone
2nd repetition - signal tone
1st repetition - signal tone
2nd repetition - signal tone
Text message
1st repetition - signal tone
2nd repetition - signal tone
1st repetition - signal tone
2nd repetition - signal tone
Confirmation with button 1.
You can now listen to the room for a
predefined period of time and then the
telephone dialler hangs up.
Telephone dialler hangs up
Telephone dialler hangs up
Telephone dialler hangs up
Telephone dialler hangs up
Telephone dialler hangs up.
Confirmation with button 1.
You can now listen to the room for a
predefined period of time and then the
telephone dialler hangs up
141