Placing In Service And Use - Unold 58835 Notice D'utilisation

PLACING IN SERVICE AND USE

The appliance has a high-quality surface. Ensure that you place tableware
carefully on the warming plate, and do not slide it. Otherwise the surface
can be scratched.
Always allow the appliance to heat up for a short time before placing
food containers on the warming plate. Thus you avoid high temperature
fluctuations and any resulting damage of the surface.
Note: The appliance is not suitable for warming up, thawing or cooking
food!
Attention: Always open the warming plate before using it. Do not, under any
circumstances, place the closed warming plate in operation!
1. Remove all packaging materials and transport safeguards. Keep the
packaging material, such as plastic bags or Styrofoam away from small
children – danger of suffocation!
2. Before use, wipe off the warming plate with a damp cloth.
3. Open the socket cover (1) that is located on the side ON/OFF switch.
4. Connect the end of plug with the socket on the side of the appliance.
5. Then plug the mains plug of the appliance into an electrical outlet as spe-
cified on the rating plate.
6. Use the ON/OFF switch (2) to select the desired temperature. You can
choose two levels.
ƒ Level I approx. 80 °C
ƒ Level II approx. 140 °C
2
Stand 10.3.2020
Copyright UNOLD AG | www.unold.de
The indicator light „Warm" is illuminated red
The indicator light „Hot" is illuminated red
1
DE
EN
FR
NL
IT
ES
PL
17 von 60