Orved bright 315 Mode D'emploi Et D'entretien page 37

WARNING!
Sensor calibration must be repeated each time the machine is moved to a place with a different altitu-
de.
1 1) Activate / deactivate the buzzer.
To activate or deactivate the buzzer, proceed as follows:
Turn on the machine using the "ON/OFF" main switch.
Press the "STOP" button for 4 seconds: a long beep signals the buzzer is activated, a short
beep signals the butter is deactivated.
Rev. 05 - 04/2018 - Cod. 1500458 - Instruction manual for vacuum chamber packaging machines with digital control panel "Serie Bright"
INSTAllATION
PROG 1
ready
37