Using The Timers; Setting The Daily Timer; Setting The Clock - JVC FS-V30 Manuel D'instructions

Using the Timers

REMOTE CONTROL RM-RXFSV5
POWER
DIMMER SLEEP
SLEEP POWER
DISPLAY FM MODE MD/AUX
AUTO
AHB PRO PRESET CD
PROGRAM RANDOM REPEAT
BASS TREBLE CANCEL
UP
SET
DOWN
TUNER
TAPE CD
BAND
VOLUME
The timers let you control listening and recording functions
automatically.

Setting the Clock

• When you plug the AC power cord into the wall outlet, the
CLOCK indicator flashes on the display.
You can set the clock whether the System is on or off.
Notes:
• The clock must be correctly set for the timers to work.
• The procedure must be completed within 2 minutes. Otherwise,
the setting is cleared and must be repeated from the beginning.
CLOCK
DOWN
(For 2 seconds)
1 Press the CLOCK button on the Unit for
more than 2 seconds.
The hour digits rapidly flash on the display.
2 Press the ¢ or 4 button to set the
hour.
Pressing the ¢ button moves the hour forwards and pressing
the 4 button moves it backwards. Hold down the button to
move the hour rapidly.
3 Press the CLOCK button.
The minute digits rapidly flash on the display.
4 Press the ¢ or 4 button to set the
minute.
Pressing the ¢ button moves the minute forwards and
pressing the 4 button moves it backwards. Hold down the
button to move the minute rapidly.
5 Press the CLOCK button again.
The selected time is set and the seconds start counting from 0.
The CLOCK indicator remains lit on the display.
CAUTION:
If the System is unplugged, or a power failure
occurs, the timer setting will be lost. You will
need to reset the clock first, then the timer.
Note: The clock may gain or lose 1 to 2 minutes per month.
STANDBY/ON
MD/
AUX
POWER
POWER
REC
REV
MODE
TAPE
PHONES
DOWN MULTI CONTROL
CLOCK
UP
or
AHB
PRO
VOLUME
TIMER
TIMER
CLOCK
CLOCK
CD
OPEN/CLOSE
FM/AM CD
UP
¢
4
When the System is in use, the display shows other items as well.
For simplicity, only the items described in this section are shown here.

Setting the Daily Timer

Once you have set the Daily Timer, the timer will be activated at
the same time every day. It can be canceled and re-activated
whenever you wish.
The Timer indicator on the display shows when the Daily Timer
you have set will be activated.
Notes:
• Finish each step within 30 seconds. Otherwise, the setting is
cleared and the procedure must be repeated from the beginning.
• The clock must be correctly set for the timers to work.
If the clock has not been set, the CLOCK indicator will flash
on the display when you press the TIMER button for more than
2 seconds, and then the display alternates between "ADJUST"
and "CLOCK" for about 5 seconds.
1 Press the TIMER button on the Unit for
more than 2 seconds.
The ON indicator lights up, and then the current ON time
flashes on the display. (Example: AM 11:00)
2 Set the ON time. (Example: AM 11:15)
Press the ¢ or 4 button on the Unit to set the hour you
want the Unit to come on.
Pressing the ¢ button moves the hour forwards and pressing
the 4 button moves it backwards. Hold down the button to
move the hour rapidly. Press the TIMER button to adjust the
minute.
3 Set the OFF time. (Example: AM 12:15)
1. Press the TIMER button on the Unit.
The hour digits of the current OFF time flashes, and then
the OFF indicator lights up on the display.
2. Press the ¢ or 4 button on the Unit to set the time you
want the Unit to be turned off.
Pressing the ¢ button moves the hour forwards and
pressing the 4 button moves it backwards. Hold down
the button to move the hour rapidly. Press the TIMER
button again to adjust the minute.
Timer indicator
ON ON SLEEP SLEEP
OFF OFF CLOCK CLOCK
ON time, OFF time
ON SLEEP
ON SLEEP
SLEEP
OFF
SLEEP
OFF
17