Using External Equipment - JVC FS-V30 Manuel D'instructions

Using External Equipment

AHB PRO
BASS
VOLUME +, –
Listening to External
Equipment
You can listen to external equipment such as an MD recorder,
turntable or other auxiliary equipment.
First make sure that the external equipment is properly
connected to the System. (See page 4.)
1 Set the VOLUME control to the minimum
position.
2 Press the MD/AUX button.
"AUX" appears on the display.
3 Start playing the external equipment.
4 Adjust the VOLUME control to the desired
listening level.
5 Apply sound effects, if you wish.
Press the AHB PRO button to reinforce the bass sound.
Press the BASS/TREBLE button on the Remote Control to
control the tone. (See "Controlling the Tone (Bass/Treble)" on
page 7.)
To exit from MD/AUX mode, select another source.
Note: For operation of the external equipment, refer to its
Instructions.
16
REMOTE CONTROL RM-RXFSV5
DIMMER SLEEP POWER
DISPLAY FM MODE MD/AUX
MD/AUX
AUTO
AHB PRO PRESET CD
PROGRAM RANDOM REPEAT
BASS TREBLE CANCEL
TREBLE
UP
SET
DOWN
TUNER
TAPE CD
BAND
VOLUME
STANDBY/ON
MD/
AUX
POWER
MD/AUX
REC
REV
MODE
TAPE
PHONES
DOWN MULTI CONTROL
Recording the System's
Source to External Equipment
You can record the System's sources to external equipment which
is connected to the LINE OUT or OPTICAL DIGITAL OUT
terminals of the System, such as cassette deck or MD recorder, etc.
First make sure that the external equipment is properly
connected to the System. (See page 4.)
Play the System's CD Player or Cassette
Deck, or tune into a station.
The recording level is not affected by the VOLUME level. It is
not affected by any sound effect, either.
Note: For operation of the external equipment, refer to its
Instructions.
AHB
AHB PRO
PRO
VOLUME
TIMER
VOLUME +, –
CLOCK
CD
OPEN/CLOSE
FM/AM CD
UP