Conseils Et Astuces - AYA ATI3/2 Manuel D'utilisation

Boilovers, melts, Remove these immediately with a
and hot sugary fish slice, palette knife or razor
spills on the blade scraper suitable for Induction
glass glass cooktops, but beware of hot
cooking zone surfaces:
1. Switch the power to the cooktop
2. Hold the blade or utensil at a 30°
3. Clean the soiling or spill up with a
4. Follow steps 2 to 4 for 'Everyday
Spillovers on the 1. Switch the power to the cooktop
touch controls
2. Soak up the spill
3. Wipe the touch control area with
4. Wipe the area completely dry
5. Switch the power to the cooktop

7. Conseils et astuces

Problem
The induction hob
cannot be turned on.
The touch controls are
unresponsive.
off at the wall.
angle and scrape the soiling or
spill to a cool area of the cooktop.
dish cloth or paper towel.
soiling on glass' above.
off.
a clean damp sponge or cloth.
with a paper towel.
back on.
Possible causes
No power.
The controls are locked.
• Remove stains left by melts and
sugary food or spillovers as soon
as possible. If left to cool on the
glass, they may be difficult to
remove or even permanently
damage the glass surface.
• Cut hazard: when the safety cover
is retracted, the blade in a scraper
is razor-sharp. Use with extreme
care and always store safely and
out of reach of children.
• The cooktop may beep and turn
itself off, and the touch controls
may not function while there is
liquid on them. Make sure you
wipe the touch control area dry
before turning the cooktop back
on.
Unlock the controls. See
section 'Using your induction
cooktop' for instructions.
56
What to do
Make sure the induction hob
is connected to the power
supply and that it is
switched on.
Check whether there is a
power outage in your home
or area. If you've checked
everything and the problem
persists, call a qualified
technician.