AYA ATI3/2 Manuel D'utilisation page 51

Table de cuisson à induction
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3.3.5 Timer control
You can use the timer in two different ways:
a) You can use it as a minute minder. In this case, the timer
will not turn any cooking zone off when the set time is up.
b) You can set it to turn one or more cooking zones off after
the set time is up.
The timer of maximum is 99 min.
a) Using the Timer as a Minute Minder
If you are not selecting any cooking zone
Make sure the cooktop is turned on.
Note: you can use the minute minder even if
you're not selecting any cooking zone.
Touch "+" the controls of the timer. The
minder indicator will start flashing and "10"
will show in the timer display.
Set the time by touching the "-" or "+" control
of the timer
Hint: Touch the "-" or "+" control of the timer
once to decrease or increase by 1 minute.
Touch and hold the "-" or "+" control of the
timer to decrease or increase by 10 minutes.
Touching the "-" and "+" together, the timer
is cancelled, and the "00" will show in the
minute display.
When the time is set, it will begin to count
down immediately. The display will show the
remaining time and the timer indicator will
flash for 5 seconds.
Buzzer will beep for 30 seconds and the timer
indicator shows "- -" when the setting time
finished.
51

Publicité

Chapitres

Table des Matières
loading

Table des Matières