AYA ATI3/2 Manuel D'utilisation page 52

b) Setting the timer to turn one cooking zone off
Touching the heating zone selection control
that you want to set the timer for. (e.g. zone
3#)
Touch timer control, the minder indicator will
start flashing and "10" will show in the timer
display.
Set the time by touching the or control of the
timer Hint: Touch the "-" or "+" control of the
timer once will decrease or increase by 1
minute.
Touch and hold the "-" or "+" control of the
timer will decrease or increase by 10 minutes.
Touching the "-" and "+" together, the timer is
cancelled, and the "00" will show in the
minute display.
When the time is set, it will begin to count
down immediately. The display will show the
remaining time and the timer indicator flash
for 5 seconds.
NOTE: The red dot next to power level
indicator will illuminate indicating that zone is
selected.
When cooking timer expires, the
corresponding cooking zone will be switched
off automatically.
Other cooking zone will keep operating if they are
turned on previously.
The pictures shown above are for reference only, and
the final product shall prevail.
Set one zone
52