AYA ATI3/2 Manuel D'utilisation page 59

E7
E8
U1
2) Specific Failure & Solution
Failure
The LED does notcome
on when unit is plugged
in.
Some buttons can't work,
or the LED display is not
normal.
The Cooking Mode
Indicator comes on, but
heating does not start.
Supply voltage is below the rated
voltage.
Supply voltage is above the rated
voltage.
Communication error.
Problem
No power supplied.
The accessorial power
board and the display
board connected failure.
The accessorial power
board is damaged.
The display board is
damaged.
The display board is
damaged.
High temperature of the
hob.
There is something
wrong with the fan.
The power board is
damaged.
Please inspect whether power
supply is normal.
Power on after the power supply is
normal.
Reinsert the connection between
the display board and the power
board.
Replace the power board or the
display board.
Solution A
Check to see if plug is
secured tightly in outlet
and that outlet is
working.
Check the connection.
Replace the accessorial
power board.
Replace the display
board.
Replace the display
board.
Ambient temperature
may be too high. Air
Intake or Air Vent may
be blocked.
Check whether the fan
runs smoothly；
if not, replace the fan.
Replace the power
board.
59
Solution B