Setting Up The Clearnote Hd; Positioning The Camera Head; Camera Positions; Close-Up And Distance Viewing - Optelec ClearNote HD Manuel D'utilisation

Optelec

4. Setting up the ClearNote HD

To setup your ClearNote HD unit please follow
the following steps:
1. Place the base plate nearby your PC on
a steady surface;
2. Unfold the ClearNote HD unit;
3. Place the ClearNote HD on the
connection point of the base plate;
4. Connect the remote control to the
camera stand;
5. If you have already installed the
ClearNote HD software connect the
ClearNote HD output cable (USB 3.0) to
your desktop or laptop PC.
When you use a laptop, you can choose to place your laptop on the
ClearNote HD base plate. The ClearNote HD can be positioned either left or
right of your laptop.

Positioning the camera head

The ClearNote HD features an ultra-flexible
camera that can be rotated around a
horizontal and vertical axis. Point the
camera down to view documents on your
desk, or position the camera horizontally for
distance or self-viewing. The flexible
camera view is more than 180º vertically
and horizontally.

Camera positions

The ClearNote HD automatically re-adjusts to its original settings when the
camera is turned from near to distance viewing and back. For example, when
you tilt the camera quickly from a whiteboard to your desktop, your preferred
viewing mode and magnification settings will automatically be applied. Three
sets of settings can be stored: document viewing, distance viewing and self
view / looking behind you.

Close-up and distance viewing

The position of the camera unit can be adjusted for desktop and distance
viewing. To view objects within 25 cm, position the close-up lens in front of
the camera unit. To view objects at a larger distance, open the close-up lens
so it is no longer in front of the camera.
English
ClearNote HD
11