Replacement Parts And Wearing Parts; Technical Specifications - Beurer EM 95 Mode D'emploi

You have an unpleasant sensation at the electrodes. How to
proceed:
(1) The electrodes are not positioned correctly. Check their positions
and re-position, if necessary.
(2) The electrodes are worn. This may cause irritated skin, as even
distribution of the current across the entire area is no longer
guaranteed. For this reason, replace the electrodes.
Skin in the treatment area turns red. How to proceed:
Immediately stop treatment and wait until your skin has returned to its
normal condition. If the redness is under the electrode and disappears
quickly, there is no risk – this is caused by the locally stimulated,
increased blood flow.
However, consult your doctor before you continue treatment if the
skin irritation persists and if it is accompanied by an itchy sensation
or inflammation. This may be caused by an allergic reaction to the
adhesive surface.

11. Replacement parts and wearing parts

You can obtain the following replacement parts directly from Cus-
tomer Services:
Designation
8 x adhesive electrodes
(45 x 45 mm)
2 x cuffs
Size XS (22-35 cm)
2 x cuffs
Size S (28-45 cm)
2 x cuffs
Size M (36-54 cm)
2 x cuffs
Size L (50-70 cm)
Item number and/or
order number
Item 661.02
Item 662.03
Item 662.04
Item 662.07
Item 662.08

12. Technical specifications

Type
Output waveform
Pulse length
Pulse frequency
Output voltage
Output current
Voltage supply
Application time
Intensity
Operating conditions
Storage/transportation
conditions
Dimensions
Weight
Maximum tolerated
atmospheric pressure
Data transfer
Note: If the device is not used according to the instructions speci-
fied, perfect functionality cannot be guaranteed!
31
EM 95
Biphasic rectangular pulses
100 – 350 µs ±10%
4 – 100 Hz ±10%
Max. 120 V pp ±10% (500 ohm)
Max. 240 mA pp ±10% (500 ohm)
Lithium polymer battery, 1170 mAh
5 – 20 minutes
Adjustable from 0 to 100
10°C – 40°C (50°F – 104°F) at a relative
air humidity of 30 – 85%
-10°C – 50°C (14°F – 122°F) at a relative
air humidity of 0 – 85%
Approx. 136 x 89 x 26 mm (without belt
clip)
200 g (incl. belt clip)
700 – 1060 hPa
2400 MHz - 2483.5 MHz frequency
band
Max. -0,32 dBM transmission power
The device uses Bluetooth
®
technology
Compatible with Bluetooth
®
smartphones / tablets
List of supported
smartphones / tablets
low energy
4.0