Specifications - Jet JWDS-1020-M Mode D'emploi

4.0 Specifications
Table 1
Model number
Stock number
Motor and Electricals
Drum motor type
Motor power
Voltage
Listed FLA (full load amps)
Motor speed
Starting amps
Running amps (no load)
Running capacitor
Conveyor motor type
Motor power
Motor speed
On/off switch
Power transfer
Power cable
1
Recommended circuit size
Sound emission (acoustic pressure level LpA, EN ISO 11202)
Capacities
Maximum board width (single pass)
Maximum board width (two passes)
Maximum board thickness
Minimum board length
3
Minimum board thickness
Main materials
Main body
Drum
Conveyor table
Drum height adjustment handle
Sanding Drum
Drum dimensions, L x Dia
Drum speed
Abrasive installed
Drum elevation per one rotation of hand wheel
Conveyor
Conveyor speed
Conveyor table dimensions
Dust collection
Dust port outside diameter
Recommended minimum extraction volume
Dimensions
Assembled dimensions, LxWxH
Shipping dimensions, LxWxH
Weights
Net weight (approx.)
Shipping weight (approx.)
1
Subject to local/national electrical codes.
2
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace conditions
vary, this information is intended to allow the user to make a better estimation of the hazards and risks involved only.
1~230V, PE, 50Hz
totally enclosed DC motor
H05RN‐F, 3x1.0mm
2
68 dB idling, 70 dB in operation
aluminium die casting and steel
extruded aluminium
80 Grit, 76mm, alu‐oxide
variable within 0 ‐3 m/min
682 x 455 x 454 mm
610 x 480 x 440 mm
6
JWDS‐1020‐M
723510M
induction motor
0.75 kW (1HP)
3.5 A
1400 /min
14 A
1.9 A
12uF 450VAC
25 W
54 / min
magnetic switch
direct drive
2
16 A
254 mm
508 mm
76 mm
60 mm
0.8 mm
steel
plastic
257 x 127 mm
1400 /min
1.6 mm
254 x 381 mm
100 mm
3
560 m /h
33 kg
37 kg