Oscillation Function / Swing Function; Cleaning And Care - Unold 86116 Notice D'utilisation

variably adjustable. The indicator
light shows the mode.
5. The appliance heats until the
desired temperature is reached,
then the appliance switches off.
The appliance will switch on again
as soon as the room temperature
drops below the set temperature.
Fan operation
Level "
(cool air)
Attention: If the appliance was
previously on heating operation,
the outflowing air will still be
warm initially. Depending on the

OSCILLATION FUNCTION / SWING FUNCTION

1. With this function it
is possible to distribute
the air flow over a lar-
ger area, because the
appliance swings back
and forth in a specific
radius.
2. The oscillation function can be
switched on in every mode. To do

CLEANING AND CARE

Switch off the appliance. To
switch off the appliance, place
the rotary regulator on position
"O" and unplug the mains plug.
Allow the appliance to cool
completely.
1. Never use any abrasive scouring
agents, steel wool, metal objects,
hot cleaning agents or disinfec-
tants.
" for the fan function
previous heating capacity it can
take some time until the appli-
ance provides cool air.
When you adjust the fan function,
you must place the rotary ther-
mostat regulator on the highest
position.
6. To switch off the appliance, place
the rotary regulator on position
"O" and unplug the mains plug.
Be aware that the appliance
can become very hot - fire ha-
zard! Particularly ensure that
children are kept away from
the appliance.
this, press the "I/O" button on the
back of the appliance.
3. If you want to stop the appliance
in a specific position, press the
"I/O" button again.
4. Switch off the oscillation function
before you switch off the appli-
ance.
2. You can remove dust in the
appliance if you carefully hold a
vacuum cleaner against the air
inlet and outlet grille.
3. Store the fan heater in a dry, safe
place so that it is protected from
dust, shocks, heat and moisture.
23