Wilo Stratos MAXO Série Notice De Montage Et De Mise En Service page 45

WELCOME - WILO-STRATOS MAXO
Start with factory settings
Pump operates for radiator
Start venting
Automatic procedure
First settings
for commissioning
Fig. 1: Initial settings menu
If necessary, press the Context button
menu to change the language.
The pump runs in factory setting when the initial commissioning
menu is open.
ƒ
The initial settings menu is exited when "Start with factory set-
tings" is activated by pressing the operating button. The display
changes to the main menu. The pump continues to run in the
factory setting.
ƒ
If venting has been started, other settings can be made in the
meantime.
ƒ
In the "First settings" menu, settings that can be chosen and ad-
justed include language, units, applications and setback opera-
tion. The chosen initial settings are confirmed by activating
"Finish initial settings". The display changes to the main menu.
Installation and operating instructions Wilo-Stratos MAXO/-D/-Z
Home screen
The pump has been
successfully installed!
Pump is currently running
in factory setting:
Application:
Radiator
Control mode:
Dynamic Adapt plus
and go to the Language
Fig. 2: Home screen
1 1.1
Radiator - Differential pressure Δp-v
Delivery head setpoint
1.0
6.1 m
Normal operation
3
Pos. Name Explanation
Main menu Selection of different main menus
1
overview
Status area: Indicates an on-going process, warning or
Error, warning error message.
or
Blue: Process or communication status dis-
process in-
play (CIF module communication)
formation dis-
1.1 Yellow: Warning
play
Red: Fault
Grey: There are no processes running in the
background, there are no warning or error
messages.
en
2 6
Duty point:
6.9
Δp-v
12.0
Q = 10.3 m³/h
H = 2.0 m
Measured values:
T fluid = 68.2 °C
P electr. 160 W
= 42.0 kWh
W electr.
=
8
Further settings
4 5
7
45