Handle Height; Connect The Machine - Husqvarna PG 530 (ph 1) Manuel D'utilisation

Handle height

CAUTION! It is recommended that this
!
height be set as close as possible to the
height of the operator's hip bone. When
the machine is running, there will be a
grinding force/pull to one side that can
be felt through the handlebars. Use the
hip to resist this force instead of trying to
control this through the arms (such
positioning will be much easier for the
operator using the machine over
prolonged periods of time.
• Set handle to most comfortable working height using
adjustment lever.
• Adjust the height of the top part of the handlebar.
8 – English
ASSEMBLING AND ADJUSTMENTS

Connect the machine

It is highly recommended to use the Husqvarna DC 3300
dust extraction system for complete dust control.
• Ensure the STOP/RUN switch is set on Stop (rotate
counter clockwise).
If you have the 3 Phase PG 530 you can use the DC
6000 and connect the power plug from DC 6000
directly to the grinder.
• Connect the power plug from the grinder to the power
outlet on the dust extractor.
• Connect the dust extractor to the machine.