With Hand Terminal - Lenze starttec E71MM402 Instructions De Montage

7
Commissioning

With hand terminal

The hand terminal E82ZBB and the required connecting cable are available as accessories. The folder
accompanying the hand terminal contains a complete description.
Menu structure
All parameters that can be used to parameterise or monitor the drive are stored in codes in the menus
user and all. The codes are numbered 6 and identified with a "C" in the text. In some codes, the
parameters are stored in numbered subcodes" 7 to maintain a clear overview of the parameter
setting (example: C0517 user) menu.
The user
l
l menu
– is active after every mains connection if the hand terminal is connected or if you connect
the hand terminal to the AIF interface during operation.
– is factory−equipped with all codes to commission a standard application.
– can be individually compiled in C0517.
The all
l
l menu
– contains all codes.
– lists codes sorted in numerical ascending order.
The following pages describe how you can toggle between userand all and change the
l
parameters in the codes.
104
0
Function keys
1
Status displays
2
Bar graph display
3
Function bar 1
4
Function bar 2
5
Parameter set
6
Code number
7
Subcode number
8
Parameter value with unit
EDK71MMXXX−020 DE/EN/FR 5.0
Change is
possible if
display
flashes
L