Error Messages (What They Mean) - Brother QL-650TD Guide De L'utilisateur

Problem
•
Is the cutter blade getting dull (blunt)?
•
The label gets Does the cutter error occur frequently?
jammed Replace the cutter unit. For details, See "Replacing the cutter unit"
around the on page 44.
•
cutter unit Have foreign objects or dust got onto the roller?
•
The label is Clean the roller using the cleaning sheet. For details, See "Roller
not ejected maintenance" on page 42.
•
properly after Is the label outlet stained?
printing Remove stains from the label outlet. For details, See "Label outlet
maintenance" on page 43.
•
The icon of
•
Is Microsoft
P-touch Add-In
Have you selected Microsoft
is not
Due to limitations of the program, the Add-In of Microsoft
displayed on
unable to be used with above settings. Quit Microsoft
®
Microsoft
and restart Microsoft
Word

Error messages (what they mean)

Error message
A system error has occurred.
System Error
No.*!
The DK Roll cover is open.
Please Close
Cover!
The cutter is not located at the
home position.
Cutter Error!
The DK Roll is misfeeding or has
Paper Cannot
run out.
be Fed!
The DK roll has run out.
Roll End!
Printing or cutting is operated
Please Insert
Label Roll! without setting DK Roll.
The printing is being operated
without setting DK Roll or without
Please Insert
*****! setting the DK Roll of the correct
size.
List Print is applicable for 62 mm
Please Insert
62mm! amorphous length roll.
Solution
® ®
Outlook running?
®
Word as your email editor?
®
Word.
Cause
®
Solution
Contact your service representative.
Close the DK Roll cover and
repeat the operation.
Turn off the printer, wait 30
seconds and then turn the printer
on again.
If the problem cannot be
corrected, contact your service
representative.
Set the DK Roll properly again. If
the DK Tape has run out, fit a
new roll.
Set a new DK Label Roll.
Set the DK Roll.
Make sure you have set the
correct size DK Roll for the
template or label layout you are
trying to print.
Set 62 mm DK Tape.
FRANÇAIS
49
STEP
1
® ®
Word is
®
Outlook ,
STEP
2
STEP
3
STEP
4