16
STEP1 Before using the printer
Installing the DK Roll
4
Applicable DK Rolls
The usable types of DK Roll for the printer are shown below.
DK Roll
General name for
DK Label and DK
Tape.
•
For the full list of available DK Rolls, see "List of consumable items" shown at the
back of this User Guide.
•
Be sure to use only genuine DK Rolls in the printer.
Installing the DK Roll
1
Press the ON/OFF button to turn the printer
OFF.
Hold the DK Roll compartment cover at the
sides near the front of the printer and lift firmly
upwards to open the cover.
2
Pull up the roll release lever and
remove the protection sheet
from the printing unit.
Remove the battery protection
sheet.
3
Place the spool into the spool
guides in the DK Roll
compartment.
• Make sure that the spool arms are
inserted firmly in the spool guides
on both sides.
• Insert the spool with the DK Roll
locator into the guide on the right
hand side of the printer.
This is a pre-cut label roll.
DK Label
Thermal recording paper and thermal recording film are
available.
This is a freely cuttable full-page adhesive tape.
DK Tape
Thermal recording paper and thermal recording film are
available.
Battery protection sheet
Roll release lever
Printing unit protection sheet
Spool
Spool guide