Reset The Printer - Brother QL-650TD Guide De L'utilisateur

50
STEP4 Maintenance and Troubleshooting
Error message
No Setting
Applicable Data!
No Numbering
Applicable Data!
Transmission
Error!
No Editing
Applicable Data!
Length Limit!

Reset the Printer

Problem
•
I would like to
clear the
printer settings
and the data
transferred
from the PC
Cause
When selecting the template
which does not include the date
and time settings, it is not
possible to set addition or
subtraction of date and time.
When selecting the template
which does not include the
numbering object, the numbering
printing cannot be operated.
An error has occurred when
receiving data from your
computer.
The selected template does not
include items for which it is
possible to change the settings.
The data which is about to print
does not fit the label size.
Turn the printer OFF by pressing the ON/OFF button. Hold the Up
arrow button ( ) and the Feed button
OFF button. Release all the buttons when the display shows "OK to
initialize ?" then press the OK button. All downloaded data and
setting transferred from the PC are cleared.
The printer is reset.
The clock and date settings are not cleared with this action.
Solution
Select the template which
includes date and time object
and then set it.
Select the template which
includes the numbering object.
Check that the cable is properly
connected and ensure the power
is turned on. Then repeat the
operation.
Unable to change the settings.
Select bigger label size or modify
its contents and settings.
Solution
while pressing the ON/
( )