Power Cord - Brother QL-650TD Guide De L'utilisateur

Imprimante d'étiquettes
Masquer les pouces Voir aussi pour QL-650TD:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4
Introduction
Follow these guidlines to avoid fire, electric shock, or other damage.

Power Cord

Use only the authorized power source
(120 V AC) for the printer.
Use only the power cord included with
the printer.
Do not overload the power outlet socket
with too many appliances or insert the
power cord into a damaged outlet
socket.
Do not cut, damage, alter or place heavy
objects on the power cord.
Battery
Only use the correct type of battery for
the printer.
Do not attempt to disassemble, alter,
apply heat or expose to a direct flame,
direct sunlight or extremely high
temperatures and humidity.
Immediately flush with water any area of
the body that comes into contact with the
inner contents of the battery. Seek
medical assistance should the contents
come into contact with the eyes or
mouth.
Insert the battery ensuring the correct
polarity is observed.
Do not allow the battery to get wet.
Remove the battery from the printer
immediately at the end of its life.
Do not solder the battery directly.
Follow these guidlines to avoid fire, electric shock, or other damage.
The Printer
The standard electrical outlet should be close to the printer and be easily accessible.
Power Cord
Always hold the power plug when removing the power cord from or inserting it into
the outlet. Pulling on the power cord cable could cause problems with the power cord.
WARNING
Do not use the power cord if it is
damaged.
Do not handle the power cord or plug if
your hands are wet.
Ensure the power plug is correctly
inserted into the power outlet.
If the printer will not be used for an
extended period, remove the power
supply cord from the electrical outlet.
Use of incorrect batteries for this printer
may cause leakage or explosion, which
could result in fire, injury or damage to
the surroundings of the machine.
Risk of explosion if battery is replaced by
an incorrect type. Dispose of used
batteries according to the instructions.
Do not short-circuit the battery terminals
with metalic objects.
The supplied battery is not
rechargeable. Do not attempt to
recharge it.
Keep the battery away from children.
Seek medical assistance immediately if
the battery is swallowed.
Avoid dropping or subjecting the battery
to severe impacts that can damage it.
Avoid subjecting the battery to
ultrasound vibration. This could cause
an internal short-circuit to occur.
CAUTION

Publicité

Chapitres

Table des Matières
loading

Table des Matières