When Using Mac Os - Brother QL-650TD Guide De L'utilisateur

36
STEP3 Connecting the printer to your PC

When using Mac OS

This section explains how to install the P-touch
Templates, Clip Art, and Printer Driver. After installing the Printer Driver, it also explains
how to set it for the machine.
•
Until the installation of printer driver is completed, do not connect the machine to
Macintosh
•
When installing it, log in as the administrator.
Here explains the example of Mac OS
QL-XXX. Read "XXX" as your printer name. The printer names in the following screens
may differ from your purchased printer name.
1
Start up Macintosh
When it does not start up automatically, double click "QL_Series"
(CD-ROM) icon.
2
Click [Mac OS X] folder and double click [QL-XXX Driver.pkg].
Follow the on-screen instructions.
3
After the installation is completed and the screen shown below is
displayed, click [Close].
The installation of printer driver is completed.
Next, install the P-touch Editor 5.0.
4
Double click [P-touch Editor 5.0 Installer.mpkg] in [Mac OS X]
folder.
P-touch Editor 5.0 Installer starts up. Follow the on-screen instructions.
®
®
. If it has been connected to it, pull out the USB cable from Macintosh
® , and insert the CD-ROM into CD-ROM drive.
®
Editor 5.0, Fonts, Auto Format
®
X 10.5.7. In the following steps, you will see
®
.