Printing A Label - Brother QL-650TD Guide De L'utilisateur

Name of template
[P07]Msg+D+T
[P08]Msg+Num
When a template is downloaded from a PC, the screen is displayed as shown below.
•
[D01] Sample1
•
[D02] Sample2

2. Printing a label

Printing only one label
1
Press the Print button
Display mode.
The contents of the template are printed.
For a preset template, the content of the label
is automatically adjusted for the size of the DK
Roll.
The machine will display an error if the content
does not fit into the print area even when the
font size is at minimum.
Specifying the number of copies to be printed
1
Press and hold down the Print button
The screen shown on the right is displayed. The
number of copies will increase for as long as the print
button is pressed.
2
When the number of copies (1 to 999)
that you want to print is displayed,
release the Print button
The number of copies displayed when releasing
the Print button
It is also possible to select the number of copies to be printed from the menu.
see "Specifying the number of copies: Menu 4/12" on page 27.
Content
Message + date + time
Message + numbering
while in Time
( )
immediately.
( )
will be printed.
( )
Sample of print outs
Received
20/07/2010
12:34
Received
001
12:34
20/07/2010
Printing...
.
( )
Copies
Copies
Printing...
FRANÇAIS
23
STEP
1
STEP
2
[P07]
STEP
3
1
3
STEP
4