Setting Clock/Language/Units - Brother QL-650TD Guide De L'utilisateur

18
STEP1 Before using the printer
6

Setting clock/language/units

Before using the printer you will need to setup the date and time, the language and the
unit of measurement your printer will use.
•
If you disconnect your machine from the power and remove the battery any settings
you have changed will be reset. see "Setting the clock: Menu 7/12" on page 29.
•
For replacing the battery, see "Replacing the lithium clock battery" on page 45.
1
Press the ON/OFF button ( ) to turn the
printer on.
The time setting screen is displayed on the LCD,
and then the year "10" and "YY" are alternately
displayed.
2
Select the year by pressing the up or
down arrow button ( / ) and then press
the OK button.
The year is set and then the month "01" and "MM"
are alternately displayed.
3
Select the month by pressing the up or
down arrow button ( / ) and then press
the OK button.
The month is set and then the date "01" and "DD"
are alternately displayed.
4
Select the date by pressing the up or
down arrow button ( / ) and then press
the OK button.
The date is set and then the hour "00" and "hh" are
alternately displayed.
5
Select the hour by pressing the up or
down arrow button ( / ) and then press
the OK button.
The hour is set and then the minute "00" and "mm"
are alternately displayed.
2010/01/01
00:00
2010/01/01
00:00
2010/MM/01
00:00
2010/07/DD
00:00
2010/07/20
hh:00