Brother QL-650TD Guide De L'utilisateur page 41

5
When the installation is completed and
the message "Click Restart to finish
installing the software" is displayed,
click [Restart].
®
The Macintosh
The installation of software is completed.
6
After restarting the computer,
connect your printer to the
computer by using the USB cable,
and then turn on the printer.
•
Before connecting the USB interface
cable, remove the caution label affixed
to the USB port of the machine.
•
If you are connecting the printer to
®
via a USB hub, it may not
Macintosh
be detected correctly. If so, connect the
printer directly to the USB port on Macintosh
7
®
(For Mac OS X 10.3.9 - 10.4.x) Double click the drive where Mac OS
installed, and click in order of [Applications]-[Utilities]-[Printer Setup Utility].
®
(Mac OS X 10.5.x-10.6) Click in order of [Apple menu]-[System Preferences],
and click [Print & Fax].
8
®
For Mac OS X 10.3.9 - 10.4.x
Click [Add] and choose USB at the top of the screen.
Choose "QL-XXX" from the list and click [Add] again to add the printer to the
"Printer List".
®
For Mac OS X 10.5.x - 10.6
Choose "Brother QL-XXX" from the list and click [Add] /
"Printer List" / "Print & Fax".
9
When the screen returns to [Printer List / Print & Fax] screen, check the "QL-XXX"
is added, and close [Printer List / Print & Fax] screen. Now you can use the
machine.
For details on software, see the P-touch
is restarted.
USB port
USB cable
®
.
®
Editor Help.
FRANÇAIS
Power cord slot
Power cord
®
X is
to add the printer to the
37
STEP
1
STEP
2
STEP
3
STEP
4