SciCan HYDRIM C51wd Mode D'emploi page 24

5. Instructions for Use
Printer Selection
Serial Printer
Default Serial
Baud Rate
9600
Default 9600
Set Regeneration
0
Default 0
HYDR IM C51wd Operator's Manual
Setup Menu – Printer Selection
Printer selection allows the user to select either a default serial
printer or the SciCan Data Logger as the recording medium for
cycle information. See section 5.11 for more information.
Setup Menu – Baud Rate
The Baud rate is a setting used in conjunction with the Printer
Selection. Baud Rate is a measure of how fast data is moving
through the serial connection. See section 5.11 for more
information.
Setup Menu – Set Regeneration
Set the salt regeneration according to the local water hardness.
Use the up and down arrows to change the value. The default
setting is 0 . See Installation Instructions for further information.
Page 18