SciCan HYDRIM C51wd Mode D'emploi page 23

5. Instructions for Use
Screen Saver
4min
Default 4min
Temperature C/F
C
Default C
Set Button Beep
On
Default On
Page 17
Setup Menu – Screen Saver
The user can adjust the time that elapses before the screen
goes into screen saver mode. Touch Screen Saver. Touch the
up and down arrows to select the desired Screen saver setting.
The default is 4 minutes. Touch the back arrow to return to the
previous menu.
Setup Menu – Temperature C/F
The user can choose to have information displayed in degrees
Celsius or degrees Fahrenheit. Touch the up and down arrows
to select the desired choice. The default is degrees Celsius.
Touch the back arrow to return to the previous menu.
Setup Menu – Set Button Beep
The user can select between having the unit beep or not beep
whenever a screen button is touched. Turn the beep on or off by
using the up and down arrows. Note that the default setting is
ON. Touch the back arrow to return to the previous menu.
HYDR IM C51wd Operator's Manual