Safety Instructions - Becker Centronic VarioControl VC260 Instructions De Montage Et D'utilisation

General information
•
Always comply with regulations of local energy supply companies as well
as VDE 100 provisions for wet and damp rooms during installation.
•
Only use the control unit in dry rooms.
•
Only use unmodified original parts from the control unit manufacturer.
•
Keep people out of the system's range of travel.
• Keep children away from control units.
• Observe all pertinent country-specific regulations.
• If the system is controlled by one or several appliances, the system's range
of travel must always be visible during operation.
• Never apply anything to the solar panel, e.g. paint.
Caution
• When connecting the control cables (protected extra-low
voltages), only use cables with sufficient electrical
strength.
Attention
•
Do not damage or scratch the solar panel.
•
Never exert pressure on the photovoltaic cells.
22 - en

Safety instructions