Cleaning And Maintenance; What If There Are Problems - Beurer BY 90 Mode D'emploi

Pèse-bébé
Masquer les pouces Voir aussi pour BY 90:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
Deleting scale data
In order to completely delete all measurements on the baby scale, press and hold the
Bluetooth
button
®
Changing the batteries
Your scale is equipped with a low battery indicator� If you operate the scale with flat batteries,
" " will appear on the display and the scale will automatically switch off� In this case, the
batteries must be replaced (3 x 1�5 V AAA)� All saved measurements remain saved�
Note:
• You have to re-synchronise the baby scale with the app (see "Initial use with the app"
section) after replacing the batteries�
• When replacing the batteries, use batteries of the same type, make and capacity�
• Do not use rechargeable batteries�
• Use batteries free from heavy metals�

8. Cleaning and maintenance

The accuracy of the measurements and service life of the device depend on its careful
handling:
The baby scale should be cleaned from time to time�
This should be done using a damp cloth and, if necessary, a small amount of detergent�
IMPORTANT
• Never use harsh solvents or cleaning products!
• Do not submerge the baby scale in water�
• Do not rinse the baby scale under running water�
• Do not clean the baby scale in the dish washer�
Storage
If you do not plan to use the baby scale for a long period of time, we recommend that you
store it in the original packaging in a dry environment� During storage, do not place any
objects on the baby scale� Store the baby scale away from children and pets� Remove the
batteries from the baby scale�

9. What if there are problems?

Display
Incorrect weight
is displayed.
Incorrect weight
is displayed.
Incorrect weight
is displayed.
for 5 seconds�
Cause
1� No flat, stable surface�
2� The maximum weight
capacity of 20 kg has been
exceeded�
No flat, stable surface�
The baby is wriggling too
much�
Incorrect zero point of scale�
Solution
1� Place the baby scale on a flat surface
without carpet� Re-tare the baby scale�
2� The maximum weight capacity of 20 kg
has been exceeded�
Place the baby scale on a flat surface
without carpet� Re-tare the baby scale�
Try to calm the baby so that it stops
wriggling�
Switch the baby scale off and on again�
Wait until the baby scale displays "0.000 kg"
and repeat the measurement�
20

Publicité

Table des Matières
loading

Table des Matières