Deleting Scale Users; Changing The Weight Unit; Cleaning And Maintenance - Beurer Signature BF 405 Mode D'emploi

Basal metabolic rate on a daily basis: the amount of energy in kcal that you require when at com-
plete rest
Active metabolic rate on a daily basis: the amount of energy in kcal that you require when under-
taking physical activity (as per the activity level you entered)
Body weight including BMI classification
kg/
Note: For more details of the values, please see the app or the FAQs at www.beurer.de
4. If a Bluetooth connection has been established and the user measurements have been successfully taken
®
(e.g. for U: 1), the values will be transferred to the "beurer HealthManager Pro" app. This is indicated by the
measurement data transfer symbol
user. They will be transferred as soon as a connection has been established.
5. The scale switches itself off automatically.
Note: If the automatic scale user detection function is not working, press the
is displayed, and wait 3 seconds. Then take the diagnostic measurement.
Note: To display your most recent diagnostic measurement, press the
displayed, and wait 3 seconds. Then press the
ment. To display further measurements, press the
on the display .
1
Note: If you are wearing shoes when taking the measurement, only your weight will be shown (the weight is
automatically saved when the scale detects the scale user).

5.5 Deleting scale users

You can delete individual scale users in the "beurer HealthManager Pro" app.
Alternatively, you can also delete scale users directly on the scale. To do so, proceed as follows:
1. Use the button
2. Press and hold the UNIT button

5.6 Changing the weight unit

You can change the weight unit either using the "beurer HealthManager Pro" app or directly on the scale:
Switch on the scale and press the UNIT button

6. CLEANING AND MAINTENANCE

Clean the surface of the scale from time to time using a slightly damp cloth. Do not use the scale again until
the surface is completely dry.
IMPORTANT
• Do not use any abrasive cleaning products.
• Never submerge the scale in water. Never rinse the scale under running water.
• Do not place any objects on the scale when it is not in use.
• Protect the scale from knocks, moisture, dust, chemicals, drastic changes in temperature and
nearby sources of heat (ovens, heaters).
. If the data cannot be transferred, up to 30 values will be stored per
14
to select your user.
4
on the rear of the device for 4 seconds until "dEL" appears.
7
button to display the most recent diagnostic measure-
2
button again. Up to 30 measurements can be shown
2
on the rear of the device.
7
15
button until your scale user
4
button until your scale user is
4