Usage; Tare Function; Cleaning And Maintenance - Beurer BY 80 Mode D'emploi

7. Usage

1. Place the baby scale on an even, hard surface; a hard surface is crucial for correct meas-
urement.
2. Press the ON/OFF/TARE button
appears on the display, the baby scale is ready to take measurements.
3. Now place the baby on the weighing surface. Do this very carefully; do not let the baby
fall and take particular care with the baby's head.
4. This baby scale has a "HOLD" function (AUTO HOLD and MECHANICAL HOLD). The
AUTO HOLD function establishes the baby's weight on the display as soon as he/she is
still enough to achieve an exact measured value. If the baby is moving around vigorously,
his/her weight cannot be recorded. Therefore, try to calm the wriggling baby to achieve
a rapid measurement, but do not touch the baby, as this will affect the weight measure-
ment. As soon as the baby's weight is established on the display, the word "HOLD" stops
flashing and the weight is displayed for a further 20 seconds. The scale then switches
off automatically.
5. If the baby is wriggling about too vigorously, you can select the MECHANICAL HOLD
function by pressing the HOLD button. Within 3 seconds, the word "HOLD" stops flash-
ing and the weight is displayed for a further 20 seconds.

TARE function

If you prefer not to place the baby directly onto the weighing surface, but instead onto a hand
towel, for example, you must place the hand towel on the baby scale BEFORE switching it
on. If the hand towel and other weights that you would like to remove again during weighing
weigh more than 50 g, you can also use the TARE function. Once you have pressed the TARE
button, "TARE" is shown in the display. To reset the scale to 0.000 g, press the TARE button
after "HOLD" has stopped flashing.

8. Cleaning and maintenance

The baby scale should be cleaned from time to time.
This should be done using a damp cloth and, if necessary, a small amount of detergent.
IMPORTANT
• Never use abrasive solvents or cleaning products!
• Do not submerge the baby scale in water.
• Do not rinse the baby scale under running water.
• Do not clean the baby scale in the dish washer.
If you do not plan to use the baby scale for a long period of time, we recommend that you
store it in the original packaging in a dry environment. During storage, do not place any
objects on the baby scale. Store the baby scale away from children and pets. Remove the
batteries from the baby scale.
to switch on the baby scale. As soon as "0.000 kg"
13