General Information; Purpose Of This Manual; Manufacturer And Machine Identification - Fimar LAV Manuel D'emploi Et D'entretien

Purpose of this manual

This manual has been written by the Manufacturer to make an integral part of the machine standard equipment. During
the design and construction phases, special care has been devoted to any aspects which might endanger the safety and
health of the people interacting with the machine. In addition to the applicable safety legislation, all "good construction
practice" rules have been adopted. The purpose of these information notes is to make machine users aware that special
care should be applied to prevent any risks. The biggest asset to this end, however, is precaution. Safety is also the
responsability of all the operators who interact with the machine. Keep this manual in a suitable place, where it can be
conveniently reached for consultation. In order to highlight some parts of the text, the following symbols have been used:
DANGER – CAUTION: it indicates hazards likely to cause severe injury ; caution is requested.
This manual comes with the following annexes:
- a guarantee certificate containing the guarantee conditions prescribed by the Manufacturer.
- documents certifying compliance with the applicable safety and personal health legislation in force.
To request After-sales service, submit inquiries or dorder spare parts, contact your Authorised dealer.

Manufacturer and machine Identification

Manufacturer Identification
Serial number
Machine model
Specifications
Translation of the original instructions
INFORMATION: technical indications of special interest.
GENERAL
INFORMATION
Mark of Compliance
Year of construction
1