Operation Tips; End-Day Cleaning; Long Periods Of Inactivity - Fimar LAV Manuel D'emploi Et D'entretien

Operation tips

An accurarate daily cleaning operation of the paaliance will preserve it for a long
time and will assure a proper functioning.
Before any maintenance and cleaning operation switch off the main switch.
Take out the removable components such as try, bottom section, nozzle-holding
pipe, vertical filtre box and tank filter.
Wash them with suitable stainleess-stell detergents in lukewarm water. The
vertical filter box is to be removed and cleaned at least every alternate cycle and
tank filter every four or five cycles.
Should you wish to empy the appliance completely for maintenance operation or
long stops operate the centrifuge buttun until water is fully drained from the tank,
then remove the draining pump inspection plug (ref. T ).
We raccomend a periodical wash cycle without any product, pouring suitable
cleaning liquids into the tank.

End-day cleaning

•
At the end of a work day, unplug the machine from the power mains.
•
Thoroughly clean the machine using neutral detergents.
•
Wipe the machine outer parts with a damp sponge.
•
Do not use steel wool or abrasive cleaning products.

Long periods of inactivity

If the machine is to be left idle for long periods of time, turn off the main wall switch, thoroughly clean the machine and
cover it with a sheet to protect it from dust.
Translation of the original instructions
OPERATION AND
CLEANING
3