General Information; Purpose Of The Manual; Machine And Manufacturer Identification - Fimar MPF1,5 Manuel D'emploi Et D'entretien

Purpose of the manual

This manual was written by the Manufacturer and is an integral part of machine equipment. During design
and construction the Manufacturer has carefully considered possible hazards and personal risks that may
result from interaction with the machine. In addition to observing the specific laws in force, the
manufacturer has adopted all "exemplary construction technique principles". The purpose of this
information is to advise the users to adopt extreme caution to avoid risks. However, discretion is
invaluable. Safety is also in the hands of all the operators who interact with the machine. Keep this
manual in a suitable place, always within reach for consultation. The following symbols are included to
better stress some passages:
DANGER – WARNING: indicates hazards that may cause serious damages; attention is
INFORMATION: indicates particularly important technical information.
The following is enclosed with this manual:
Warranty certificate describing the Manufacturer's warranty conditions.
-
Documents that prove conformity with effective health and safety laws.
-
Contact the Authorised dealer for any service request, information or spare parts order.

Machine and manufacturer identification

Manufacturer Identification
Serial number
Technical specifications
INFORMATION
required.
4
GENERAL
Conformity markings
Machine model
Year of manufacture
1