Storing The Machine; Sharpening Metal Cutting Blades; Inspection And Maintenance By User - Stihl FS 410 C-M Notice D'emploi

English

Storing the Machine

If the machine is to remain out of use for
approx. 3 months or more
Drain and clean the fuel tank in a
N
well ventilated place
Dispose of fuel in accordance with
N
the regulations and having regard
for the environment
Run the engine until the carburetor
N
is dry. This helps to prevent the
carburetor diaphragms sticking
together.
Remove, clean and inspect the
N
cutting attachment. Treat metal
cutting attachments with protective
oil.
Thoroughly clean the machine
N
Store the machine in a dry and safe
N
place, out of the reach of children
and other unauthorized users
30
Sharpening Metal Cutting
Blades
Use a sharpening file (special
N
accessory) to sharpen dull cutting
attachments. In case of more
serious wear or nicks: Resharpen
with a grinder or have the work done
by a dealer – STIHL recommends a
STIHL servicing dealer.
Resharpen frequently, take away as
N
little material as possible: two or
three strokes of the file are usually
enough.
1
1
2
2
Resharpen the cutters (1) uniformly
N
– do not alter the contour of the
parent blade (2) in any way.
See cutting attachment packaging for
additional sharpening instructions.
Balancing
After resharpening about 5 times,
N
check the cutting attachment for
out-of-balance on a STIHL balancer
(special accessory) or have it
checked by a dealer and re-
balanced as necessary – STIHL
recommends a STIHL servicing
dealer.
Inspection and Maintenance
by User
Clamped Area of Handlebar
2
1
Check the freedom of movement of
N
the handlebar (1) in the clamp
moldings (2) at regular intervals.
Handlebar is difficult to move
3
1
Loosen the wing screw (3) just
N
enough for the handlebar to be
moved.
Push the handlebar (1) sideways
N
out of the clamp.
Soak a cloth in a clean, non-
N
flammable cleaning solution – do
not use a cleaning agent containing
oil or grease.
FS 410 C-M, FS 460 C-M