Before First Use; Checking The Battery Pack Charging Level; Charging The Battery Pack - Parkside PWSAP 20-Li C3 Instructions D'utilisation Et Consignes De Sécurité

˜ Before first use
˜ Accessories
To operate this product safely and correctly, the
following accessories, i.e. tools and accessory
tools, are necessary:
Grinding disc
Cutting disc
Guard for cutting
Guard for grinding
Wire brush
Accessories and accessory tools are available
through your authorised dealer. When buying
always consider the technical requirements of this
product (see "Technical data").
If you are not certain, ask a qualified specialist
and get advice from your trusted dealer.
NOTE
This instruction manual contains information
u
and suggestions for several accessory
tools and their uses. The accessory tools
depicted are not included in the shipment
(see "Scope of delivery"), but are meant
to indicate additional possibilities for using
this product.
m
WARNING!
Do not use accessories not recommended
u
by Parkside. This may result in electric shock
or fire.
Suitable battery packs and chargers
Parkside X 20 V team battery pack and charger
50 GB/IE
˜ Operation
˜ Attaching/removing the
battery pack
Removing the battery pack: Press the
battery pack release button
battery pack (Fig. D).
[ 5 ]
Attaching the battery pack: Align the
battery pack to the handle and slide it into
[ 5 ]
it. Ensure it clicks noticeably in place.
The battery pack can only be inserted into the
product in one direction.
˜ Checking the battery pack
charging level
(Fig. B)
Check battery pack charge level: Press the
button. The charging level LEDs
[ ]
light up:
Charging level LED
Red/orange/green
Red/orange
Red
˜ Charging the battery pack
(Fig. C)
NOTE
The battery pack
u
any time without reducing the life.
Interrupting the charging process does not
u
damage the battery pack
Charge the battery pack
when it is at medium or low charging level.
. Remove the
[ ]
[
Charging level
[ ]
Maximum
Medium
may be charged at
[ 5 ]
.
5 ] [
before operation
[ 5 ]
]
Low