Adventys KTi1 4000 Guide D'utilisation Et D'installation page 38

Guarantee
Keep the proof of purchase to use the guarantee service of your product.
Any modification such as drilling, welding, crimping, clinching, etc., is not permitted and is
not covered by the manufacturer's warranty.
Any intervention resulting from an installation or use not complying with the requirements
of this notice will not be accepted under the manufacturer's warranty and it will be
permanently suspended.
The manufacturer warranty is subject to the non-modification of the product and its
mechanical and electrical characteristics.
Problems of appearance caused by the use of abrasive products or the friction of the
containers on the vitroceramic glass hob which does not cause failure or inability to be
used do not fall within the framework of the warranty.
All repairs should be performed by a qualified technician.
.
Only the distributors of our brand :
- KNOW YOUR APPLIANCE AND ITS OPERATION PERFECTLY.
- FULLY APPLY OUR METHODS OF ADJUSTMENT, MAINTENANCE AND REPAIRS.
- USE ONLY ORIGINAL PARTS.
In case of a claim or if you wish to order spare parts from your distributor, please specify
the full reference numbers of your appliance (appliance type and serial number). This
information appears on the plate fixed under the metal casing of the appliance.
The descriptions and characteristics given in this booklet are for information purposes only
and do not imply commitment from the manufacturer. Concerned about the quality of our
products, we reserve the right to carry out necessary changes or improvements without
prior notice.
Made In France
38