Adventys KTi1 4000 Guide D'utilisation Et D'installation page 32

Operating instructions
Power setting
When a pan, compatible with induction technology is placed on the
working zone, it is possible to adjust the power level by pressing power
touches (+) or (-).
As soon as the pan is removed from the cooking zone, the power dis-
play indicates the absence of the pan by a blinking. There is close to no
consumption of power.
If the power display flashes when the pan recovers the working zone, it
means that the material of the pan is not compatible with the induc-
tion technology.
To check if a pan in induction-friendly, place a magnet underneath, if it
sticks, the pan should work with induction ((!) There may be excep-
tions)
Switching On/Off the device
Connect your device on the adapted electric socket of a three phase network
400V, 50 or 60Hz. Procedure identical to the KT2IM device's procedure.
Press the "On/Off" touch to switch on the device. The value "0" displays on the
indicator of temperature or power. Still no power is send at that point.
Press the power touch (+) to send power to the pan. The power display indi-
cates the power level set into the pan.
Press the "On/Off" touch to switch off the product. The power is cut and the
display turns off.
32