Adventys KTi1 4000 Guide D'utilisation Et D'installation page 33

Operating instructions
Press (+) and (-) to adjust the timer. The duration of the timer is between 1
and 99 minutes.
Timer is an option, and does not need to be on during the cooking process.
We can raise or lower position by a short press on the timer touches (+) or (-).
By letting your finger on one of the touches, the selection raises quickly. A
sound notifies the user when the timer is done.
The end of the timer forces the stop of the power, the product is automatical-
ly switched off to avoid overcooking.
To stop the sound emitted at the end of the timer, a brief press on any touch-
es is enough.
Once the timer is set, the display indicates the remaining time. To switch and
go back to the power display, a brief press on the timer touch is enough.
How to use the programmable
The user can allocate power selection from 1 to 20 to the 3 touches P1, P2
and P3, once memorized, it can used right the way by the user, instead of
selecting the power with (+) and (-) control touches.
To assign and memorize a power level on one of those three touches P1, P2
and P3, the user has to first adjust the level of power to be memorized with
(+) and (-) touches.
Then, In order to memorize it, the user should hold for at least 3 seconds his
finger on either P1, P2 or P3 touches. A "BIP" sound signal means that the
power is saved and memorized. You can change and memorize as many
different power as you like.
During the use, a simple touch on P1, P2 or P3 is enough to affect the level of
power desired (just like (+) and (-) control touches).
33